| Customization: | Available |
|---|---|
| Color: | Black, Grey, White, as Pantone Colors |
| Material: | PE or Rubber |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2, PE Foam/Crosslinked Foam/irradiation cross-linked PE foam:
The hardness: Shore C15-42, soft and comfortable
Size: Thickness :1-110mm,
Sheet size : 1000*2000mm, 1500*2000mm, 1200*2400mm(48"X96'')
Roll Size: 1000mm(W)*50m(L) or 1500mm(W)*50m(L)
Density: 20-150kgs/m3
Color: red, blue,yellow, white, black...any color according to the Pantone Card
Adhesive : on back side or both sides
3, NBR foam(NBR/PVC): Open cell
Density: 50-150Kg/m³
Size: 1000-1800mm width,,always the 10m length,,,for the thickness 3mm-35mm
Color: black, red, purple, blue....any colors according to the Pantone Card
Excellent resistance to acid, fuel & oil,
Adhensive:one side or double-side
4, CR Foam Sheet(neoprene foam sheet), EPDM Foam(Close Cell/Open Cell)
Cr Foam Density: 150-200kgs/m3
EPDM Foam(Closed Cell): 110-300kgs/m3
EPDM Foam(Open Cell): 70-120kgs/m3
Size: 1000*2000*50mm
CR Foam: with the perfect fire-proof
Adhesive: one side or Double-side
XPE foam
Largely Used:
Building and construction: for heat insulation inner-wall, soundproof, under flooring for the heat insulation and waterproof
Automotive and transportation: as the sealing or gasket or adhesive tape
Marine: most the density 32kgs/m3 for the marine
Sports Equipment: the GYM mat,Kids Mat
Packing Industry: for the Shockproof, for the protection
Shoe Industry: for the Insole or outsole of the Shoes
| Item No | Density (kg/m3) | Hardness (HC) |
Tensile (Kpa) |
Elongation (%) | Size(mm) in sheet |
| PE25 | 20-25 | 15±3 | 160 | 150 | 1000mm*2000mm, 1220mm*2440mm, 1500mm*2000mm, One layer the max thickness 100mm, heat Lemination Max thickness 250mm |
| PE30 | 28-32 | 20±3 | 160 | 160 | |
| PE45 | 45-50 | 28±4 | 240 | 160 | |
| PE60 | 60-65 | 40±5 | 300 | 160 | |
| PE90 | 90-100 | 60±5 | 500 | 150 | |
| PE120 | 120-130 | 65±5 | 600 | 120 | |
| PE140 | 130-145 | 70±5 | 700 | 115 |
| XPE Foam Technical Specification | ||||||||
| Testing Item | Properties | |||||||
| 5 times | 8 times | 10 times | 15 times | 20 times(45kgs/m3) | 25 times | 30 times(33kgs/m3 | 35 times(28kgs/m3) | |
| Density kg/m3 | 200±30 | 125±15 | 100±10 | 66.7±8 | 50±6 | 40±4 | 33.3±3 | 28.6±2 |
| Shore Hardness ° | 60~70 | 50~60 | 45~50 | 35~45 | 30~35 | 25~30 | 18~25 | 13~18 |
| Water Absortion Rate (23ºC±, 24h) g/cm3 | ≤0.02 | ≤0.02 | ≤0.03 | ≤0.03 | ≤0.04 | ≤0.04 | ≤0.05 | ≤0.05 |
| Thermal conductivity(W/m.k) | ≤0.092 | ≤0.082 | ≤0.072 | ≤0.062 | ≤0.053 | ≤0.047 | ≤0.0414 | ≤0.038 |
| Tensile strength (L/W) MPa | ≥1.35/1.08 | ≥1.12/0.89 | ≥0.88/0.71 | ≥0.68/0.56 | ≥0.39/0.33 | ≥0.33/0.25 | ≥0.25/0.20 | ≥0.20/0.16 |
| Tensibility (L/W) % | ≥260/220 | ≥230/200 | ≥210/185 | ≥190/170 | ≥170/150 | ≥160/135 | ≥140/130 | ≥120/110 |
| Tearing strength (L/W) kN/M | ≥5.90/7.10 | ≥4.80/5.40 | ≥3.60/4.00 | ≥2.80/3.30 | ≥1.80/2.30 | ≥1.60/2.00 | ≥1.35/1.70 | ≥1.25/1.50 |
| Compression Set (25%, 22h) % | ≤5 | ≤6 | ≤7 | ≤7 | ≤9 | ≤9 | ≤11 | ≤11 |
| Dimensional Change Rate (70±, 22h)(L/W) % | ≤-6/-4 | ≤-6/-4 | ≤-6/-4 | ≤-6/-4 | ≤-6/-4 | ≤-8/-6 | ||
Q: Do you manufacture your own foam?
A: Yes, we do manufacture the foam using our own presses and molds. We have various sizes molds.
Q: Why your price labeled so cheap?
A: We manufacture the foam buns our self, and export directly, no extra fees added.
Q: What is your lead time?
A: Ninety percent of all our orders can be loaded in 15 days.
Q: How much can you fit on a 40 HQ container?
A: Approximately 205 buns of 4" x 48" x 96"
Q: What is your minimum order?
A: We do not have a minimum order. However, small qty will be waste for the shipping costs.
Q:What are acceptable forms of payment?
A: We accept wire transfers, TT payment, Paypal, Western Union, LC etc.
Q: What densities are available?
A: We stock 1.5lb to 15lb densities.
Q: What colors are available?
A: Charcoal; Light Charcoal; Grey; Mint Green; Blue; White; Yellow; Red; Lavender; Lime Green; and Natural.
Q:Does your material come with skins?
A: Generally no, although some materials are available with skins upon request.
Q: What can be used to cut your foam?
A: Most tools that can be used to cut wood can also be used to cut our foam. These include table saws, band-saws, table routing, water-jet, etc.
Q: What is the working temperature of the foam?
A:Maximum continuous operating temperature of our foam is between -110°F to 180°F (-79°C to 82°C)
Q: What is the shelf life of the foam?
A: Crosslinked polyethylene foam does not have a shelf life.
Q: Does the foam float?
A: Yes, it does; XLPE is a water resistant foam.
Q: What are the differences between EVA and XLPE?
A: EVA is soft. Our XLPE and EVA foam products are similar materials and are difficult to distinguish.
The primary differences are that EVA is softer, more resilient, and has stronger recovery after compression. Whereas polyethylene foams are firmer and more resistant to heat.
Both of them provide excellent protection and shock absorption for packaging applications.
For more info, please feel free to contact us any time, 7 x 24 service !
topsunfoam.en.made-in-china.com
){kind=link}